wAP R - RBwAPR-2nD

Features

The wAP LTE is a small weatherproof wireless access point with a built in cellular modem that supports 2G, 3G and 4G (LTE) connectivity. Connect to the wAP’s built-in 802.11b/g/n wireless and access the LTE network from your phone or any other wireless device. The wAP LTE also has one 10/100 Ethernet LAN port for your wired devices. 

The weatherproof device can be mounted outside your house, in the vehicle, on your porch or anywhere else where you need wireless access from your phone or computer. It also includes a desktop stand so you can put it inside the building near a window.

LTE cards are connected to two internal antennas with u.FL connectors, so if you want, you can unplug the connectors and add your own external LTE antenna for larger coverage. Unit has the several powering options - 9-30v PoE-in by Ethernet port, DC jack and Automotive connector, very handy in mobile devices like car, bus or train. 

RBwAPR-2nD&R11e-LTE includes LTE modem that supports International LTE bands 1,2,3,7,8,20,38 and 40.

Specification

Product code: RBwAPR-2nD&R11e-LTE
10/100 Ethernet ports: 1
2G Category: Class12
3G Category: R7 (21Mbps Downlinks, 5.76Mbps Uplink)
Antenna gain dBi for 2.4 GH: 2
CPU: QCA9531
CPU core count: 1
CPU nominal frequency: 650 MHz
DC jack input Voltage: 9-30 V
Dimensions: 185 x 85 x 30 mm
LTE Category: 4 (150Mbps Downlink, 50Mbps Uplink)
LTE FDD bands: 1 (2100MHz) / 2 (1900MHz) / 3 (1800MHz) / 7 (2600MHz) / 8 (900 MHz) / 20 (800MHz)
LTE TDD bands: 38 (2600MHz) / 40 (2300MHz)
Max Power consumption: 8W
MiniPCI-e slots: 1
Number of DC inputs: 1
Number of chains: 2
Operating System: RouterOS (License level 4)
PCB temperature monitor: Yes
PoE in: Passive PoE
Size of RAM: 64 MB
Storage size: 16 MB
Storage type: FLASH
Tested ambient temperature: -40°C .. +60°C tested
Voltage Monitor: Yes
Wireless 2.4 GHz chip model: QCA9531
Wireless 2.4 GHz standards: 802.11b/g/n